Jiffy Steamer J-4000 Garment with Plastic Steam Head, 120 Volt, 20 x 11 x 64, Gray

DITCH YOUR DRY CLEANER!!! LOVE THIS STEAMER!!
I wanted a steamer to finally ditch my dry cleaner. At $5 a shirt/sweater, dry cleaning was costing a fortune, and not to mention the chemicals, and my clothes kept coming back with static, odd stains, and sweaters hung instead of folded. So, I figured Id ditch the dry cleaner and steam instead.I bought the J-4000M steamer after much research and reading reviews, and I am NOT disappointed! I wanted a professional steamer to use at home because I had bought a much cheaper version (not a Jiffy) before, and it didnt steam properly and “spit” water out. So this time I opted to go for the J-4000M (with the metal attachment). Although it was more expensive than the J-2000M, I knew I wanted a professional version, like the kind used in retail clothing stores. I honestly don’t know how much of a difference there is between the two models…but other reviews I read were mixed, some said not much of a difference, others said there was. So i cant comment on any differences. I also opted for the metal head, over the plastic, only because I personally feel the metal gets hotter and hence produce a better result…but I am no expert and cant say for sure if metal is better than plastic.As far as the steamer itself goes…its solid construction and very well made! It was easy to put together, nothing to it really. (look under the steamer for the wrench that is attached via a magnet). But really it was just a matter screwing the metal rods together and attaching to the tank, and screwing the hose on (the head came already attached to the hose). THATS IT…pretty easy! This thing is heavy duty! But not heavy and its on wheels so its easy to move around. I had read some reviews that said it was too heavy…but I didnt find that to be a problem at all. unless you plan on carrying the thing around…but no need because there are wheels. Perhaps if you need to empty the water out…? I, however, like to do all my clothing at the same time…so I fill it up and steam til it runs dry…so I never need to empty it. Just dont add more water than you need and you should be fine. The handle is made of wood, which is heaver than plastic, but I didnt find it to feel heavy while using, nor did it get hot in the whole 2 hours I steamed.As far as the steam…..yes, it does take about 15 min to pre-heat, but Im ok with that. Once its preheated, you switch to steam, and within 2 minutes, its steaming. The tank takes up to 4 quarts. I didnt time it, but I got about 2 hours on a full tank. I can do ALOT of clothes on 1 tank. I did cotton shirts, rayon, polyester, sweaters, linen, fabric blends, dress slacks and it ALL came out perfectly steamed and very easily! I was a steaming fool!! The ONLY small complaint (if I have to give one), is that the rod could be a bit taller. Otherwise, no complaints. Im in love with this steamer!I highly recommend this steamer!! And the best part is that with the money Im saving on dry cleaning this thing pays for itself in no time!

Love!!!
I don’t take large purchases lightly. I own a handheld steamer that works well- but it is a lot of work to use. I wanted something industrial that would do the work for me. I am addicted to buying beautiful clothes- but with that curse they often wrinkle easily and I hardly wear them. This has changed that!!!I researched for a good week with chatgpt. What I learned was that (for me) the steam power was the most important specification and this is what sets the Jiffy J4000 a part from its competitors. I learned that my handheld one had a power of about 25g/min and so I knew I wanted something much stronger. Most other models run 30-40g/min. This model runs from 50-60g/min. It is more powerful and efficient than most other products.I received the product yesterday and I was ecstatic! It does take 15 min to warm up but then I pressed 4 outfits in the next 5 minutes. I also pressed a thick blazer collar that had been folding the wrong way. My only wish was that the rack was higher or adjustable for long pants (my inseam is 34-36) and doing the bottom of pants and dresses was difficult — but I plan on buying a steam board to mount and help with this. Overall- it’s a huge win for me and will honestly change my life in that I am no longer limited in what articles of clothing I can wear.

So far so good We use to use these steamers at work and they lasted a long time I have purchased many others in the past and the last one I got from T-Fal didn’t even last a year so I decided instead of wasting my $$ yearly spend the extra.

Tenemos un negocio de ropa donde planchamos alrededor de 600 pzas a la semana y ha sido genial el performance.Arranca en 15 min después de haber llenado el deposito de agua.