Vgogfly RGB Led Light Bulbs 10W Color Changing Light Bulb with Remote Control 5000k Daylight White (2 Pack) Remove Battery Separator Before Use

Vgogfly Smart RGB Bulb – User Guide Model: 10W E26 Smart Bulb with Remote Control Key Specifications Power: 10W Voltage: 110V AC (50/60Hz) Base: Standard E26 Brightness: 950 lumens Color Accuracy: CRI >80 Lifespan: 30,000 hours Beam Angle: 270 degrees Remote Range: 5-10 meters (16-33 ft) Setup & Installation Safety First: Turn off power at the circuit breaker before installation. Install Bulb: Screw bulb firmly into E26 socket. Restore power. Default Mode: Initial startup activates neutral white light. Use remote to access color modes. Remote Prep: Remove thin plastic battery separator (located between batteries) before first use. Remote Features and Tips Battery Life: 6-8 months. Replace when responsiveness declines. Standby Drain: Once activated, remote draws minimal standby power even when idle. Memory Function: Bulb saves last-used mode when powered off via remote. Timer Limitation: Timer settings cancel if manual adjustments are made mid-cycle. Switch Control Operation Toggle modes manually without the remote: Turn bulb ON. Quickly flip switch OFF-ON within 2 seconds to cycle through 9 presets: Modes: Energy Saver, Strobe, Fade, Red, Green, Blue, Cyan, Pink. Attention: Before using the remote control for the first time, remove the battery separator that is placed between the batteries in the remote. This separator is installed at the factory to preserve battery life and ensure safety during storage and transportation. Once removed, the batteries will be properly connected, allowing the remote control to function. Q: Why is my remote control not working? A: Before using the remote control for the first time, please remove the battery separator that is placed between the batteries in the remote. This separator is installed at the factory to preserve battery life and ensure safety during storage and transportation. Once removed, the batteries will be properly connected, allowing the remote control to function.
RGB+DAYLIGHT WHITE: Vgogfly RGB light bulbs put together with independent 5000K Daylight White chips and RGB chips, meet all of your needs with ample lighting. It comes with 12 different colors of lights, you can use these colors to set different moods to decorate your home.
SWITCH & UPGRADE REMOTE CONTROL: The Vgogfly color-changing bulb can be controlled either via the switch or the remote (keep the switch in the ON positiont). The remote can operate the bulb from a maximum distance of 5-10 meters, and it will not cause any signal interference to nearby electronic devices. Note: Remove the battery separator from the remote control before first use to activate it.
2 DYNAMIC LIGHTING MODES: There are different lighting settings. Smooth mode (12 color gradients). Flash mode, which flashes the lights to different colors and creates a fun, party environment. You are also able to freely control the speed of the color-switching in the flash mode with the dimming buttons.
TIMER FUNCTION: With the timer function, Vgogfly RGB led bulb will automatically turn off according to what time you set for it. To apply this function, press the timer button once, and it will automatically turn off in one hour. Press it twice for 2 hours. The maximum time is 23 hours.
MEMORY FUNCTION: Vgogfly RGB light bulb is engineered and designed to automatically remember the color and brightness when you last turned off your RGB light bulb. You never have to adjust your desired settings every time you turn the light on.