Aqara Motion and Light Sensor P2, Motion Detector with Light Sensor, Matter Over Thread, Requires 2-in-1 Matter Controller & Thread Border Router, Supports Apple Home, Alexa

Nice Matter/Thread Motion Sensor
Overall, this is a neat little motion sensor that runs by Matter over Thread.It is exposed to various platforms as “occupancy” rather than motion not due to failings on the sensors part, but rather as the current limitations of the developing Matter Standard. Also, exposed to various platforms is the light/illuminance sensor.All in all, it functions exactly as you would expect for a motion sensor to work. If there is motion, it gets triggered. Light levels only update as motion is triggered, not a constant update; I would imagine otherwise battery brain would be obscene.(Important to note is: You do need to have a functional thread network set up for this device to work, as that’s the communication protocol of the device)Visually, it’s a nice looking sensor. Small, solid feeling plastic casing, feels and looks niceTo pair, you can either scan the QR code provided on the booklet that’s enclosed, but if you lose that or your QR camera is not working, the booklet provides the numbers to input. ***As well as this the Matter Code is printed on the top of the sensor it is associated with.*** Nicely discrete but accessible, should the page of the booklet be misplaced.The batteries are 2 (two) CR2450 coin batteries. As this is a brand new sensor, battery life is still to be determined, but even so it’s not something I’m too worried about. Even the “lower” estimate of two years depending on usage is nothing to sneeze at. I’d be more concerned if it was only estimated to last a few months.The only thing I’m not too pleased with is the inability to adjust distance/level parameters of the sensor without the, at time of writing, unreleased Aqara M3 Hub

3 months of use with no issues
TL:DR Love this product. It’s small, easy to use, picks up motion and responds quickly. And 100% worth the money. Very happy with this purchase.I first want to mention that I use apple home with a HomePod mini as my hub. I set up the device on the home app without using the Aqara app at all. I got this motion detector for my bathroom hue lights. I wanted them to turn on at a very low brightness automatically when I walked in the bathroom and turn off when no motion is detected.I needed the lights to turn on and off automatically as a nightlight when I come and go but I did not want them to turn off when I am actually using them at full brightness (it was very annoying to have them turn off when I am getting ready and step out of the bathroom for a minute or two).The home app does not allow conditions to be used with their automations so I used an app called Home+ to set up this automation (which is the picture I uploaded). I set up the motion sensor to not input any command when the lights are set to anything besides off. Been using the motion sensor for 3 months and my setup works like a charm without any issues since instal. Apple home says battery is still at 100% (although I can’t guarantee accuracy). Would absolutely buy again.

Aqara Motion and Light Sensor P2 Review
The Motion Sensor is a compact powerhouse that excels in speed and simplicity. Its sleek design and quick setup make it a breeze to integrate into any smart home. I’ve mounted mine in a ceiling corner of the laundry room and paired it with HomeKit via Thread.The results are astonishing: the lights turn on in less than half a second after entering the room, thanks to a simple HomeKit automation. This level of responsiveness is truly impressive. The sensor accurately detects motion without being triggered by my pets, and the ability to remove unnecessary labels adds a clean, modern touch.While I appreciate the sensor’s current sensitivity, the lack of adjustable options within Apple HomeKit is a minor disappointment. Additionally, the absence of USB-C charging feels like a missed opportunity.Despite these small drawbacks, the Motion Sensor is an excellent choice for anyone seeking reliable and fast motion detection. Its performance in my laundry room has significantly improved convenience and energy efficiency. The sensor uses an easily replaceable coin cell battery, and while I can’t speak to battery life yet, the overall value for the price is impressive.

I would reccomend these but also depends on what you’re using these for, I easily connected them to my aqara hub and haven’t had any issues with them disconnecting from my hub, and the battery life seems to be very long because they’ve been running for months without any issues. I also love the stick on feature it’s just like 3m tape you stick it to the wall easily and it works as intended. I designed it to turn on certain lights when motion is detected in a room, or to record a video when motion is detected in a certain area, making it great for security and they’re very small and look cool on the wall but also barely noticeable, if you have the hub and have other aqara accessories this pairs very well with them and the automations you can create are pretty cool, but if you don’t have the aqara brand products or hub I don’t know how well it works or if it would work at all.

Doet wat hij moet doen en is makkelijk te installeren.