This Heat Only Thermostat has low voltage controls with a snap-action switch for heating systems. It comes with mounting hardware (wall plate included) and does not require leveling. This manual thermostat controls heating in your home simply and effectively. Heat only manual thermostat Simple worry free operation Bimetal temperature sensor Decorative back plate included,Item does not come with an off switch Mercury free
13 reviews for Honeywell Home CT30A1005 Standard Manual Economy Thermostat, Almond, 0.6
0.0out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
Clint –
Simple and easy
Simple and easy to hook up. Two wire (red and white). Works as it should. Using it in a garage for a heater with fan.
Helpful(0)Unhelpful(0)You have already voted this
Jon Beltrami –
As advertised
Works perfectly
Helpful(0)Unhelpful(0)You have already voted this
Takota Lenfest –
Easy installation if u need the instructions u probably shouldn’t be hooking it up lmfao
Just as ordered very easy very simple and works very well seems to keep it a steadier temp then the old thermostat
Helpful(0)Unhelpful(0)You have already voted this
John C Klein –
Thermosat
Very good product
Helpful(0)Unhelpful(0)You have already voted this
Happy Camper –
simple, plain
this is simple, but it works. used it for an old guy living in his trailer. he didn’t want a fancy digital one that needed batteries lol, so simple he got. bulletproof
Helpful(0)Unhelpful(0)You have already voted this
Carmela –
Easy installation!
Why did you pick this product vs others?:Easy installation. Durable and value for the money!
Helpful(0)Unhelpful(0)You have already voted this
Eulas Watson –
Works
Works as good as the old one when it was new.
Helpful(0)Unhelpful(0)You have already voted this
ToolReview –
No. Not suitable for a millivolt-only (no external power) application.
Honeywell Home CT30A1005 Standard Manual Economy ThermostatI see in the Q&A’s the manufacturer replied it is suitable for Empire heaters, while a seller said no it isn’t. I expect that seller speaks from having had thermostats returned to him as unusable.My observation – not suitable for Empire heaters that need a millivolt thermostat. This seems to be a ‘2-wire’ thermostat, not a millivolt thermostat.It generally failed to turn on. Millivolts measured arriving at the thermostat were adequate. I found infinite resistance across its contact points. (That should measure zero when the points appear to be closed). I see ‘rated up to 30 volts’ on a tag inside. Maybe this needs the usual 24 volts from a transformer. I cleaned the points with electronics solvent. No improvement. Moving the temp lever hot/cold several times is the only way to start the furnace. It just won’t come on by itself as the room cooled even when the points appear closed.It’s incompatible with my new heater that calls for a millivolt thermostat. The new heater:’HouseWarmer Slim-Profile Direct Vent Heater with Blower – Natural Gas’ isSame as – many Empire heaters. I assume its made by Empire.So I bought an Empire ‘reed switch’ thermostat. I see it’s different internally. Instead of mechanical points it has a reed assembly similar to a small resistor but glass, bridging between the two terminals. A magnet on the temperature-sensing coil passes by this reed component to trigger its internal points.’Cozy Low Voltage Reed Switch Thermostat’ looks to be same as the Empire thermostat.Advice – Not for use with Empire heaters. Not for use where a Reed Switch is called for.Summary – This Honeywell CT30 Series thermostat is not suitable for a heater that has no external voltage source.
Helpful(0)Unhelpful(0)You have already voted this
sylvain ouellet –
Fonctionne comme l’original, même mieux très satisfait de se thermostat. Pour le remplacement, de l’ancien. 12 Volt
Helpful(0)Unhelpful(0)You have already voted this
JJ –
Works great easy to install, very relialable. I used this theromastat to replace the wireless one that came with my gas fireplace. No more issues with leaky batteries and replacement costs.
Helpful(0)Unhelpful(0)You have already voted this
ikearus –
I live in a condo heated by the hot water radiator. Unfortunately, there are only two wires for the thermostat, so no smart or fancy thermostats could be installed. This is the most basic Honeywell thermometer I could find. It’s excellent for the price, but I found some inaccuracies about 2º C on the cover stencil.
Helpful(0)Unhelpful(0)You have already voted this
Brad Bradshaw –
I have many of them installed in my house to regulate the heat in each room that’s supplied by my outdoor wood furnace. This is a RELIABLE, SIMPLE, NON-EXPENSIVE device that all the big box store no longer stock.
Clint –
Simple and easy
Simple and easy to hook up. Two wire (red and white). Works as it should. Using it in a garage for a heater with fan.
Jon Beltrami –
As advertised
Works perfectly
Takota Lenfest –
Easy installation if u need the instructions u probably shouldn’t be hooking it up lmfao
Just as ordered very easy very simple and works very well seems to keep it a steadier temp then the old thermostat
John C Klein –
Thermosat
Very good product
Happy Camper –
simple, plain
this is simple, but it works. used it for an old guy living in his trailer. he didn’t want a fancy digital one that needed batteries lol, so simple he got. bulletproof
Carmela –
Easy installation!
Why did you pick this product vs others?:Easy installation. Durable and value for the money!
Eulas Watson –
Works
Works as good as the old one when it was new.
ToolReview –
No. Not suitable for a millivolt-only (no external power) application.
Honeywell Home CT30A1005 Standard Manual Economy ThermostatI see in the Q&A’s the manufacturer replied it is suitable for Empire heaters, while a seller said no it isn’t. I expect that seller speaks from having had thermostats returned to him as unusable.My observation – not suitable for Empire heaters that need a millivolt thermostat. This seems to be a ‘2-wire’ thermostat, not a millivolt thermostat.It generally failed to turn on. Millivolts measured arriving at the thermostat were adequate. I found infinite resistance across its contact points. (That should measure zero when the points appear to be closed). I see ‘rated up to 30 volts’ on a tag inside. Maybe this needs the usual 24 volts from a transformer. I cleaned the points with electronics solvent. No improvement. Moving the temp lever hot/cold several times is the only way to start the furnace. It just won’t come on by itself as the room cooled even when the points appear closed.It’s incompatible with my new heater that calls for a millivolt thermostat. The new heater:’HouseWarmer Slim-Profile Direct Vent Heater with Blower – Natural Gas’ isSame as – many Empire heaters. I assume its made by Empire.So I bought an Empire ‘reed switch’ thermostat. I see it’s different internally. Instead of mechanical points it has a reed assembly similar to a small resistor but glass, bridging between the two terminals. A magnet on the temperature-sensing coil passes by this reed component to trigger its internal points.’Cozy Low Voltage Reed Switch Thermostat’ looks to be same as the Empire thermostat.Advice – Not for use with Empire heaters. Not for use where a Reed Switch is called for.Summary – This Honeywell CT30 Series thermostat is not suitable for a heater that has no external voltage source.
sylvain ouellet –
Fonctionne comme l’original, même mieux très satisfait de se thermostat. Pour le remplacement, de l’ancien. 12 Volt
JJ –
Works great easy to install, very relialable. I used this theromastat to replace the wireless one that came with my gas fireplace. No more issues with leaky batteries and replacement costs.
ikearus –
I live in a condo heated by the hot water radiator. Unfortunately, there are only two wires for the thermostat, so no smart or fancy thermostats could be installed. This is the most basic Honeywell thermometer I could find. It’s excellent for the price, but I found some inaccuracies about 2º C on the cover stencil.
Brad Bradshaw –
I have many of them installed in my house to regulate the heat in each room that’s supplied by my outdoor wood furnace. This is a RELIABLE, SIMPLE, NON-EXPENSIVE device that all the big box store no longer stock.
Crystal-Jade Glenn –
Easy to install great product