Halo MS180 180 Degree Replacement Motion Security Floodlight Sensor, Bronze
$14.71
Related Products
The All-Pro MS180 is a replacement, adjustable motion security floodlight sensor. This motion sensor features a durable, high-impact, non-metallic sensor head. It is weather resistant and provides years of trouble-free service. This outdoor flood light motion sensor easily installs to one or more existing lights. 30 motion detection zones, the most of any brand. Turns lights on automatically when motion is detected; detects motion at 180 Degree and up to 70 ft. Adapts to most wall and eave mount applications. Convenient tool-free sensor head adjustment. Adjustable time and sensitivity settings. Power outage protection, saves energy by automatically resetting at dawn if lights are triggered by power interruption. Approximate coverage area of 7,600 square feet.
180 degree detection zone up to 70 ft.
Integral photo cell prevents lights from turning ON with motion during daylight hours (auto modes)
Motion sensor turns lights ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes)
Turns lights on automatically when motion is detected
Adapts to most wall and eave mount applications
13 reviews for Halo MS180 180 Degree Replacement Motion Security Floodlight Sensor, Bronze
Add a review
$14.71
MLee –
Works As Expected
I purchased this to replace an older Snap-It brand that is apparently out of business. It functions the same with the same wiring. The only thing experienced that threw me a curve was the Eaton has a Dusk-to-Dawn feature that causes the light to stay on at night. The instructions indicate in the trouble shooting section that in that situation, it is in the Dusk-to-Dawn mode, but nowhere else in the instructions is Dusk-to-Dawn mode mentioned let alone how to even get into that mode.I found that omission in the instructions a little disconcerting as it caused me a period of difficulty as the older Snap-It had no such feature although the units are essentially identical in looks.I didn’t subtract a star for that but that is something Eaton should fix in their instructions because with some unknown sequence of operation of the switch, it activates the Dusk-to-Dawn feature although if it is in that mode, you turn it off for 40 seconds to exit that mode. Nice, but how does it get in that mode?I have no need for that Dusk-to-Dawn feature as the unit runs a relay and not the lights themselves and I have a manual switch that will turn them on or turn it off or turn the auto switch on for automatic function.
Colonel –
Great sensor!!
Excellent sensor, I installed behind my shed with two 65W lamps 10 feets apart from the sensor. The sensor works better than I thought, get me 180* far away. Also gets rabbits and little animals around the area. I was tired of buying junk from Home Depot, they all cheap, so I decided to build my own with this sensor in the middle. No problem with rain and snow, the manual recommend set it up facing the ground. Easy to set up, attached the black to power from the breaker and the red to the black from the lamps plus the neutrals and ground. Manual is clear and easy to read. Note . I bought this sensor second time and I notice the material is different, the plastic broke but I managed to set it up with two yellow lights. The first one I got still picking up cats, dogs all night long.
Ron Anderson –
works well but don’t short or overload
I have two of these working the exterior stairway lighting. One located at the bottom of the stairs. The other at the top. I was skeptical when one review mentioned that the output was a dry contact relay. I overloaded one of the senors and it stopped turning off the light. Curious, I took it all apart and sure enough there is a small circuit board relay that switches the load. Just be cautious, the relay output is very light duty. In my case, too much load fused the contact. Maximum load is listed as 300 watts. My fault for being over the rating. I have since ordered another sensor and replaced my floodlights with LEDs. Giving it 4 stars because one of the sensors is not as good at sensing movement. Sometimes it will work at quite a distance, then the next time you have to right up next to it. However, these sensors do the job for me and for the price they seem like a good option. So far, about a month of operation on them and they’re doing the job.
Shawn –
Great motion sensor
This motion sensor works great. Takes a little time to dial it in. But worth it
TroyF –
Read the insert
This product deserves five stars, but I’m here to give it five as to make up for a one star review that like me, thought this product was garbage.I connected this to a radio in my garden to keep deer out. I thought the duration switch was faulty as I could not get the test feature to work, and the only setting that seemed to function was in 4 second increments. This worked, but obviously this product was not working correct.The following day the radio kept coming on while in the garden which was rather annoying. Then I remembered this was supposed to have that daylight sensor as well. Cheap garbage. Headed to the reviews to warn others about how terrible this sensor is.I saw the pdf for the instructions and thought I would browse this to make sure that daylight sensor was in the description. It did in fact say the sensor was there. I also caught the but about test being a four second bust. I assumed test was just always on, then it clicked. I built this during the day, tested it during the day. It wouldn’t kick on because the daylight sensor was working as intended. Felt like a dip but I’m glad it’s not defective.My one suggestion would only be to change the duration switch. I wouldn’t mind if it clicked for ever minute it started on. Currently if i wanted the motion sensor set for a specific time, i think your only option is trail and error.
Roadhog –
Perfect replacement
My OEM sensor was failing to turn the light on occasionally. This unit returned my motion light to like new condition. Easy to install.
Serg –
Does not work. Period.
Sensitivity adjustment does not workTime settings does not work, switching the light off after a minute or keeping it on all the timeWhen hot outside is not sensitive at all – do not triggersAfter switching the light switch on the light does not comes on immediately.In short – garbage. Avoid.
Lewis A Edge Jr –
Motion Sensor for My Driveway Floodight
This sensor was not a “replacement” but, instead, was part of my new installation of the pole-mounted LED floodlight over my driveway. The pole also houses an intercom and a numeric touch-pad which activates our motorized gate. This sensor mounts through a standard 1/2″ knock-out and causes my light to automatically illuminate those items for visitors to see after darkness.Doing the expected job of activating the light when it detects motion after dark, this sensor keeps the light on for the duration that I set for it or as long as there is motion.On the package containing this sensor, “tungsten” was indicated, but it works just fine with the LED light above it, which produces far more illumination per watt.The sensitivity and shut-off delays have ample adjustment ranges for my needs. Since this is a new installation, I have no experience with how long it will last, but currently it is performing as expected.
Mr. Martin Offer –
Installed this on the back deck, where the wife walks to the garage for her car. It didn’t tale long to set it up so that the range and sensitivity were what we needed. It comes on within 2 steps of either the house or garage door, stays on for 2 minutes (which we want) but doesn’t come on when the leaves are blowing off the trees. A cat can set it off, but thats ok. Works well, thank you
Amazon Customer –
Really nice simple unit, direct replacement for my original one. Really simple to setup and seems to be of good quality. Most importantly the wires are a standard color black, white and red
LL.a –
Mike from Ottawa, OntarioThe Cooper Lighting MS180 appears to function as intended. However, one draw back is that you cannot set the sensitivity, because the device does NOT have this feature. Also keeping in mind that the instructions state that only one of these sensors can be used on one switch and I believe this to mean one circuit also. The red LED light … technician stated that it will only function (blink) when something comes into the target area. That it the only time you will see this light illuminate. Pretty good ‘bang’ for your buck.
Ron F. –
Sensor replacement took a bit of work but operates well once up. Great way to keep exiting motion detection LED light operational.
TRACKER –
All happy with product. Use near indoor garage not having to put switches on and off always. Great!!.